Accessories compressed air
Nozzle range, Extension tubes and Damper
Rubber nozzle
Fits directly onto the tube. For use on sensitive surfaces. Suitable for the leak test. The nozzle is available in three different sizes, either individually or as a set.
Technical data
Part-no. | Diameter Ø mm |
11 208 9956 | 14 |
11 208 9957 | 25 |
11 208 9958 | 35 |
11 208 9960 | 3-Part-Set |
Venturi-Nozzle
Fits directly onto the tube. The air flow is increased by aspirating the ambient air to 100%. Suitable to blow away light chips. In blocking the nozzle, the air is blown laterally, reducing the outlet pressure to less than 2 bar.
Part-No. | 11 208 9963
Bypass-Nozzle
Fits directly onto the tube. When back pressure, the pressure is released through the side outlets (or circulated), whereby the maximum outlet pressure to less than 2 bar is reduced.
Part-No. | 11 208 9961
Shield Nozzle
Fits directly onto the tube. Creates a protective air jacket, suitable for the removal of lightweight wood shavings or liquids. When back pressure, the air is let out from the side and reduces the outlet pressure to less than 2 bar.
Part-No. | 11 208 9954
Shield
Fits directly onto the tube. Protects the operator from flying chips. For mounting at any point on the tube. Nitrile bushing in favor of a simple assembly. Diameter of the transparent shield: 100 mm.
Part-No. | 11 208 9955
Damper
Fits directly onto the tube. Reduces noise in an effective way, when a low noise level is required. Noise level: 82 dB (A)
Part-No. | 11 208 9962
Part-No. |Regulär | 11 208 0215
Part-No. |Star-Tip*| 11 208 3215
Tube 90 mm
Fits directly onto the thread of the blowgun.
Airflow: Regular - 500 I / min.
Star-Tip * - 190 l / min.
tube controler 90 mm
Fits directly onto the thread of the blowgun. Reduces the outlet pressure to a safe level if a blockage inside the tube, or if a counter pressure should occur.
Part-No. | 11 208 0216
Extension tube 300/500 mm
Fits directly onto the thread of the blowgun. Provides better access to hard to reach places.
Air flow: 380 l / min.
Part-No. | 300 mm | 11 208 3219
Part-No. | 500 mm | 11 208 0220
Star-Tip-Extension tube 300/500 mm
Fits directly onto the thread of the blowgun. Provides better access to hard to reach places; Moreover, equipped with damping and OSHA-compliant features.
Part-No. | 300 mm | 11 208 3219
Part-No. | 500 mm | 11 208 3220
Flexible Extension tube 400 mm
Fits directly onto the thread of the blowgun. Can be set weighed and for special applications in hard-to-reach areas. Flexible
6 mm - coated copper tube. Air flow: 120 l / min.
Part-No. | 11 208 0220
All products marked with an „OK“ icon in accordance with the OSHA standard STD1-13.1: „... when a back pressure occurrence of the static pressure at the main port shall not exceed 2 bar.“
All products marked with an „ear“ symbol have a sound level below 85 dB (A) and in accordance with the EU Machinery Directive § 1.5.8 with regard to noise reduction requirements.
Nozzles for blow guns type APN- ...
Description | Material | Type | Part-No. |
1 Standard nozzle | Steel, galvanized | P1 | 61 9012 11 |
2 Noise damped nozzle | Steel, galvanized | GD1 | 61 9012 12 |
3 Safety nozzle | Steel, galvanized | SD1 | 61 9012 13 |
4 Noise damped safety nozzle | Steel, galvanized | GSD1 | 61 9012 14 |
5 Injector nozzle | Steel, galvanized | J1 | 61 9012 15 |
Extension nozzle 150 mm | Steel, galvanized | VD1 | 61 9012 16 |
Nozzle range
Extension 150mm
All information subject to change without further notice.
No responsibility is taken for the correctness of the named specifications.
Product data sheet
Contact Person
Sale
Mediation via secretary:
Marita Förster
Phone +49-231/91 72 11 - 11
E-Mail: marita.foerster@ bahco.de
Service / Order Processing:
Ursula Fietze
Phone +49-231/91 72 11 - 18
E-Mail: ursula.fietze@ bahco.de