Grinders
Small-/Polisher Grinder Series FG - high performance in a compact design
Small grinders are characterized by an accurate collet alignment, light weight, compact design and high power to weight ratio. They are widely used for grinding and deburring, mounting either a grinding wheel or a burr. The versions differ in the air ducting to the front, to the side or rear, as well as by extended spindles.
Small Grinder Series FG-12U, FG and FG-25D-50D have an ergonomic design with double spindle bearings, which is connected via a coupling to the motor shaft. This construction provides lower vibration, accuracy and easy handling.
FG-13X
| Type | Collet | Grinding | Mill. | Idle | Capacity | Total | Weight | Max. air | Hose |
| size | pin Ø | pin Ø | speed | length | consumption | size | |||
| mm | mm | mm | rpm | kW | mm | kgs | m³/min | mm / inch | |
| Front air exhaust | |||||||||
| FG-13-1F | 3 | 13 | 10 | 30000 | 0.15 | 158 | 0.3 | 0.25 | 6.3 / ¼" |
| FG-13-10F | 3 | 13 | 10 | 30000 | 0.15 | 158 | 0.4 | 0.25 | 6.3 / ¼" |
| Rear air exhaust incl. supply and exhaust hose | |||||||||
| FG-13X-1F | 3 | 13 | 10 | 30000 | 0.13 | 183 | 0.4 | 0.25 | 6.3 / ¼" |
| FG-13X-10F | 3 | 13 | 10 | 30000 | 0.13 | 183 | 0.4 | 0.21 | 6.3 / ¼" |
Compressed air connection:. ¼ “ BSP.
FG-26HX-1F
| Type | Collet | Grinding | Milling | Idle | Capacity | Total | Weight | Max. air | Hose size |
| size | pin Ø | pin Ø | speed | length | consumption | ||||
| mm | mm | mm | rpm | kW | mm | kgs | m³/min | mm / inch | |
| Version with side exhaust air | |||||||||
| FG-26H-1F | 6 | 25 | 13 | 24000 | 0.25 | 152 | 0.5 | 0.50 | 9.5 / ⅜ |
| FG-50H-1F | 6 | 32 | 22 | 18000 | 0.34 | 180 | 0.8 | 0.43 | 9.5 / ⅜ |
| Version with rear exhaust, incl. inlet and outlet hose | |||||||||
| FG-26HX-1F | 3 | 13 | 10 | 24000 | 0.25 | 188 | 0.5 | 0.50 | 9.5 / ⅜ |
| FG-50HX-1F | 3 | 13 | 10 | 18000 | 0.34 | 214 | 0.8 | 0.43 | 9.5 / ⅜ |
Compressed air connection: ¼" BSP.
FG-26L-1BF - Extended version
| Type | Collet | Max. Ø | Milling | Idle | Capacity | Total | Weight | Max. air | Hose |
| size | Grinding pin | pin | speed | length | consumpt. | size | |||
| mm | mm | mm | rpm | kW | mm | kgs | m³/min. | mm / inch | |
| Version with exhaust sideways | |||||||||
| FG-26L-1BF* | 6 | 25 | 13 | 24000 | 0.22 | 306 | 0.9 | 0.40 | 9.5 / ⅜ |
| FG-26HL-1F | 6 | 45 | 13 | 14600 | 0.22 | 273 | 0.7 | 0.55 | 9.5 / ⅜ |
| FG-3H-5F | 6 | 50 | 25 | 14600 | 0.48 | 367 | 1.5 | 0.55 | 9.5 / ⅜ |
* with steel case
Compressed air connection: ¼" BSP, FG-3H-5: ⅜" BSP.
All information subject to change without further notice.
No responsibility is taken for the correctness of the named specifications.
Product data sheet
Spare Part List FG-13-1F, -2, -10F, -20
Spare Part List FG-26H-1, -1F & FG-26H-2, -2N
Spare Part List FG-26L-1-1BF
Spare Part List FG-50H-1, -1F & FGH-2-2N
Contact Person
Sale
Mediation via secretary:
Marita Förster
Phone +49-231/91 72 11 - 11
E-Mail: marita.foerster@bahco.de
Service / Order Processing:
Ursula Fietze
Phone +49-231/91 72 11 - 18
E-Mail: ursula.fietze@bahco.de