We offer a variety of chipping hammers for different extractions. The hammers are suitable for light cleaning, stone engraving, tapping, removal of paint, rust, weld flux and small ribs on castings. The model FCH-25B offers a „blower function“, which is ideal for blowing away dirt on workpieces. The slag hammers Series H12 have a high impact frequency for easy cleaning and putty removing works.
They are supplied with either the 10 mm type THD-12L wide cutting chisel or the 20 mm type THG-12B/C glazier chisel.
| Type | Beats | Piston-Ø | Stroke | Total | Weight | Air consumpt. | Compressed | Schlauch-- |
| Safety start | length | (under Load) | air connect. | weite | ||||
| lever | Hz | mm | mm | mm | kgs | m³/min. | BSP | mm / inch |
| FCH-20-1F | 90 | 20 | 16 | 176 | 0.8 | 0.14 | ¼ | 6.3 / ¼ |
| FCH-20F-1F | 90 | 20 | 16 | 182 | 1.0 | 0.14 | ¼ | 9.5 / ⅜ |
| FCH-25-1F | 60 | 25 | 20 | 204 | 1.5 | 0.18 | ¼ | 9.5 / ⅜ |
| FCH25B-1F | 60 | 25 | 20 | 239 | 1.7 | 0.18 | ¼ | 8.0 / 5/16 |
* Delivery incl. chisel Type G-2-1
** Delivery incl. chisel Type F-3-2
All models with safety start lever!
| Type | Part-No. | Size |
| L [mm] | ||
| Blanc | G-1-1 | 125 |
| Blanc | G-1-2 | 155 |
| Blanc | G-1-3 | 200 |
| Blanc | G-1-4 | 250 |
| Flat | G-2-1 | 130 |
| Flat | G-2-2 | 155 |
| Flat | G-2-3 | 200 |
| Flat | G-2-4 | 250 |
| Type | Part-No. | Size | Type | Part-No. | Size |
| L [mm] | L [mm] | ||||
| Blanc | F-1-1 | 140 | Flach | F-2-2 | 155 |
| Blanc | F-1-2 | 155 | Flach | F-2-3 | 200 |
| Blanc | F-1-3 | 200 | Flach | F-2-4 | 250 |
| Blanc | F-1-4 | 250 | Flach | F-2-5 | 300 |
| Blanc | F-1-5 | 300 |
| Type | Part-No. | Size |
| L [mm] | ||
| Wide angled | F-3-2 | 155 |
| Wide angled | F-3-3 | 200 |
| Wide angled | F-3-4 | 250 |
| Wide angled | F-3-5 | 300 |
| Type | Beats | Piston | Stroke | Length w.o. | Weight | Air consumpt. | Compr. air | Hose size |
| Hz | Ø mm | mm | chisel mm | kgs | u. Load m³/min. | connect. BSP | mm / inch | |
| H12C | 150 | 16 | 15 | 140 | 0.7 | 0.15 | ¼" | 6.3 / ¼" |
Delivery without chisel!
| Wide cutting chisel | Type | Part-No. | Length | Width | for machine |
| long version | [mm] | [mm] | Type | ||
| THD-12L | 65 8000 60 | 130 | 10 | H-12C |
| Glazier chisel | Type | Part-No. | Length | Width | for machine |
| [mm] | [mm] | Type | |||
| THG-12B/C | 65 8015 20 | 130 | 20 | H-12C |
All information subject to change without further notice.
No responsibility is taken for the correctness of the named specifications.
Marita Förster
Phone +49-231/91 72 11 - 11
E-Mail: marita.foerster@bahco.de
Ursula Fietze
Phone +49-231/91 72 11 - 18
E-Mail: ursula.fietze@bahco.de
