Hydraulic cylinder of the CFA series are made from high-strength aluminum. Both components the cylinder housing and the piston are hard anodized for better protection against wear and corrosion. CFA cylinders are available in capacities of 23-95 tons at an operating pressure of 700 bar and strokes of 100 or 200 mm.
All CFA cylinders are supplied with pressure plate and a bottom plate of steel. Thus guarantees a fault-free operation even on uneven ground or not parallel lifting point.
The hydraulic cylinders can also be operated at 800 bar therefore. The capacity in-creases by about 15%.
| Type | Work | Capacity | Stroke length | Oil vol. | Piston | Piston area | Diam. | Hight | Weight |
| press./MPA | kN(t) | mm | cm³ | Ø mm | cm² | mm | mm | kgs | |
| CFA250-100 | 70 | 230 (23) | 100 | 332 | 60 | 33.2 | 100 | 212 | 4.4 |
| CFA250-200 | 70 | 230 (23) | 200 | 664 | 60 | 33.2 | 100 | 312 | 5.0 |
| CFA500-100 | 70 | 500 (51) | 100 | 709 | 85 | 70.9 | 140 | 223.5 | 9.2 |
| CFA500-200 | 70 | 500 (51) | 200 | 1418 | 85 | 70.9 | 140 | 323.5 | 12.7 |
| CFA750-100 | 70 | 730 (74) | 100 | 1039 | 100 | 103.9 | 170 | 235 | 14 |
| CFA750-200 | 70 | 730 (74) | 200 | 2078 | 100 | 103.9 | 170 | 335.5 | 18.3 |
| CFA1000-100 | 70 | 930 (95) | 100 | 1327 | 110 | 132.7 | 190 | 243 | 18.4 |
| CFA1000-200 | 70 | 930 (95) | 200 | 2655 | 110 | 132.7 | 190 | 343 | 24.7 |
| Type | Capacity | A | B | C | D | E | M | N | V |
| kN(t) | mm | Ø mm | mm | Ø mm | Ø mm | mm | mm | ||
| CFA250-100 | 230 (23) | 212 | 100 | 24 | 60 | 53 | M100x4 | 37 | - |
| CFA250-200 | 230 (23) | 312 | 100 | 24 | 60 | 53 | M100x4 | 37 | - |
| CFA500-100 | 500 (51) | 233.5 | 140 | 31 | 85 | 75 | M140x4 | 45 | 21 |
| CFA500-200 | 500 (51) | 323.5 | 140 | 31 | 85 | 75 | M140x4 | 45 | 21 |
| CFA750-100 | 730 (74) | 235.5 | 170 | 18 | 100 | 75 | M170x4 | 54 | 31 |
| CFA750-200 | 730 (74) | 335.5 | 170 | 18 | 100 | 75 | M170x4 | 54 | 31 |
| CFA1000-100 | 930 (95) | 243 | 190 | 39 | 110 | 95 | M190x4 | 56 | 34 |
| CFA1000-200 | 930 (95) | 343 | 190 | 39 | 110 | 95 | M190x4 | 56 | 34 |
All information subject to change without further notice.
No responsibility is taken for the correctness of the named specifications.
Marita Förster
Phone +49-231/91 72 11 - 11
E-Mail: marita.foerster@bahco.de
Ursula Fietze
Phone +49-231/91 72 11 - 18
E-Mail: ursula.fietze@bahco.de
