Hammer, Sand rammer & Scalers
Chipping Hammer Series FCH & H - suitable for light cleaning and putty removing works.
We offer a variety of chipping hammers for different extractions. The hammers are suitable for light cleaning, stone engraving, tapping, removal of paint, rust, weld flux and small ribs on castings. The model FCH-25B offers a „blower function“, which is ideal for blowing away dirt on workpieces. The slag hammers Series H12 have a high impact frequency for easy cleaning and putty removing works.
They are supplied with either the 10 mm type THD-12L wide cutting chisel or the 20 mm type THG-12B/C glazier chisel.
Chipping Hammer Series FCH
Technical data
| Type | Beats | Piston-Ø | Stroke | Total | Weight | Air consumpt. | Compressed | Schlauch-- |
| Safety start | length | (under Load) | air connect. | weite | ||||
| lever | Hz | mm | mm | mm | kgs | m³/min. | BSP | mm / inch |
| FCH-20-1F | 90 | 20 | 16 | 176 | 0.8 | 0.14 | ¼ | 6.3 / ¼ |
| FCH-20F-1F | 90 | 20 | 16 | 182 | 1.0 | 0.14 | ¼ | 9.5 / ⅜ |
| FCH-25-1F | 60 | 25 | 20 | 204 | 1.5 | 0.18 | ¼ | 9.5 / ⅜ |
| FCH25B-1F | 60 | 25 | 20 | 239 | 1.7 | 0.18 | ¼ | 8.0 / 5/16 |
* Delivery incl. chisel Type G-2-1
** Delivery incl. chisel Type F-3-2
All models with safety start lever!
Chisel for FCH-20-1F
| Type | Part-No. | Size |
| L [mm] | ||
| Blanc | G-1-1 | 125 |
| Blanc | G-1-2 | 155 |
| Blanc | G-1-3 | 200 |
| Blanc | G-1-4 | 250 |
| Flat | G-2-1 | 130 |
| Flat | G-2-2 | 155 |
| Flat | G-2-3 | 200 |
| Flat | G-2-4 | 250 |
Technical Drawing
Chisel for FCH-20F-1F, 25-1F und 25B-1F
| Type | Part-No. | Size | Type | Part-No. | Size |
| L [mm] | L [mm] | ||||
| Blanc | F-1-1 | 140 | Flach | F-2-2 | 155 |
| Blanc | F-1-2 | 155 | Flach | F-2-3 | 200 |
| Blanc | F-1-3 | 200 | Flach | F-2-4 | 250 |
| Blanc | F-1-4 | 250 | Flach | F-2-5 | 300 |
| Blanc | F-1-5 | 300 |
Technical Drawing
Chisel for FCH-20F-1F, 25-1F und 25B-1F
| Type | Part-No. | Size |
| L [mm] | ||
| Wide angled | F-3-2 | 155 |
| Wide angled | F-3-3 | 200 |
| Wide angled | F-3-4 | 250 |
| Wide angled | F-3-5 | 300 |
Technical Drawing
Chipping Hammer Series H
Technical data
| Type | Beats | Piston | Stroke | Length w.o. | Weight | Air consumpt. | Compr. air | Hose size |
| Hz | Ø mm | mm | chisel mm | kgs | u. Load m³/min. | connect. BSP | mm / inch | |
| H12D | 150 | 16 | 15 | 140 | 0.7 | 0.15 | ¼" | 6.3 / ¼" |
Delivery without chisel!
Chisel for H12C
| Wide cutting chisel | Type | Part-No. | Length | Width | for machine |
| long version | [mm] | [mm] | Type | ||
| THD-12L | 65 8000 60 | 130 | 10 | H-12D |
| Glazier chisel | Type | Part-No. | Length | Width | for machine |
| [mm] | [mm] | Type | |||
| THG-12B/C | 65 8015 20 | 130 | 20 | H-12D |
All information subject to change without further notice.
No responsibility is taken for the correctness of the named specifications.
Product data sheet
Contact Person
Sale
Mediation via secretary:
Marita Förster
Phone +49-231/91 72 11 - 11
E-Mail: marita.foerster@bahco.de
Service / Order Processing:
Ursula Fietze
Phone +49-231/91 72 11 - 18
E-Mail: ursula.fietze@bahco.de